The Universal Parts 12V 8.5AH YTX9-BS is a maintenance-free dry AGM battery with included acid pack, designed for full-size scooters, mopeds, ATVs, dirt bikes, motorcycles, and off-road vehicles. Ships via FedEx Ground to the lower 48 states only (ORM-D regulated item).
Key Features
- Maintenance-free dry AGM design with included acid pack
- 12V / 8.5AH capacity
- CCA (Cold Cranking Amps): 120
- Sealed, spill-proof construction
- ORM-D regulated � FedEx Ground, lower 48 states only
Specifications
- Voltage: 12V
- Capacity: 8.5AH
- CCA: 120
- Length: 5.94 in (151mm)
- Width: 3.40 in (88mm)
- Height: 4.20 in (107mm)
- Weight: 7.4 lbs
Replaces These Part Numbers
26012-1261, 31500-156-001, 31500-HN1-003, 6MF8, CTX9-BS, ES9BS, GTX9-BS, LTX9-BS, M329BS, M429BS, PTX9-BS, XTAX9-BS, YTX9-BS
Activation Instructions
- Place battery on a level surface outside the vehicle.
- Remove the electrolyte container from the storage bag and remove the strip of caps � set aside for sealing later. Do not pierce or open the foil seals.
- Invert the container over the cell filler ports and push down firmly to break the foil seals. Hold level and allow electrolyte to flow until the container is empty.
- If flow stops, tap the container or battery case gently. Do not remove the container until completely empty.
- Remove the empty container and firmly press the strip of sealing caps flush into the filler ports by hand � do not use a hammer. Never remove caps or add water/electrolyte during service life.
- For batteries under 18AH, allow to stand 20�60 minutes before charging or installing.
Always wear gloves and eye protection when handling battery acid. Do not smoke during activation.
California Prop 65 Warning: www.p65warnings.ca.gov
